Mercury Tracer
Manual transmission fluid capacity & service interval
Mercury Tracer manual transmission fluid capacity ranges from 2,68 to 3,35 liters. Service intervals include 12000 km/12 months or 6 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 2.0 16V (1997-1999) |
|
| 1800 LTS (1991-1996) |
|
| 1900 (1991-1996) |
|
Additional Notes
- The Mercury Tracer manual transaxle fluid capacity varies by engine configuration, with the 1800 LTS and 2.0 16V sharing a 3.35-liter fill and the 1900 engine requiring a notably smaller 2.68-liter fill.
- A 2.68-liter capacity in the 1900 engine transaxle is measurably lower than the 3.35-liter figure seen in the other two configurations, reflecting a difference in gearbox design or internal volume between the two units.
- The 1800 LTS and 1900 engine variants, both covering model years 1991-1996, share the same check interval of 12,000 km or 12 months under normal use conditions.
- The 2.0 16V variant, introduced for 1997-1999, carries a check interval expressed only in time at 6 months under normal use, rather than the combined distance-and-time interval applied to the earlier 1991-1996 engines.
- All three configurations are designated as normal use, meaning the stated check intervals apply to standard operating conditions rather than severe or demanding service cycles.
- The shift from a 12,000 km/12-month interval on the 1991-1996 engines to a 6-month time-only interval on the 2.0 16V reflects a difference in how service frequency is measured across the two generation groups.