Mercury Tracer
Coolant capacity & service interval
Mercury Tracer coolant capacity ranges from 5 to 6 liters. Service intervals include changing at 45000 miles or 48000 miles/36 months, and checking at 15000 miles/6 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 2.0 16V (1997-1999) |
|
| 1800 LTS (1991-1996) |
|
| 1900 (1991-1996) |
|
Additional Notes
- The Mercury Tracer 1800 LTS carries a base cooling system capacity of 5 liters, which rises to 6 liters when the vehicle is equipped with air conditioning. The additional liter accounts for the heat exchanger circuit added by the A/C system.
- The 1900 engine variant, covering the same 1991-1996 period as the 1800 LTS, holds a flat 5-liter cooling system capacity with no conditional variation listed for optional equipment.
- Both the 1800 LTS and 1900 configurations share an identical service interval under normal use conditions: a coolant change at 48,000 miles or 36 months, whichever comes first.
- The 2.0 16V, introduced for 1997-1999, shows a transmission-dependent capacity split. Vehicles paired with an automatic transmission or transaxle require 6 liters, while those with a manual transmission or transaxle require 5 liters.
- The 2.0 16V is the only configuration among the three to carry a periodic inspection interval, with a coolant check specified at 15,000 miles or 6 months under normal use conditions.
- The 2.0 16V change interval of 45,000 miles differs slightly from the 48,000-mile interval applied to the 1800 LTS and 1900 engines, representing a modest reduction in the drain period between engine generations.
- The 2.0 16V change interval is expressed in miles only, without an accompanying month threshold, unlike the 36-month pairing seen in the 1991-1996 engine specifications.