Mazda MPV/ Premacy, CP (USA / CAN)
Coolant capacity & service interval
Mazda MPV/ Premacy, CP (USA / CAN) coolant capacity ranges from 9,8 to 12,4 liters. Service intervals include checks at 30000 miles/ 24 months and changes at 30000 miles/ 24 months, 45000 miles/ 36 months, 60000 miles/ 60 months, and 120000 miles/ 120 months. The data covers 12 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MPV/ Premacy 3.0 V6-24V (CAN) (2004-2005) |
|
| MPV/ Premacy 3.0 V6-24V (CAN) (2004-2005) |
|
| MPV/ Premacy 3.0 V6-24V (USA) (2004-2005) |
|
| MPV/ Premacy 3.0 V6-24V (USA) (2004-2005) |
|
| MPV/ Premacy 3.0 V6-24V (CAN) (2001-2004) |
|
| MPV/ Premacy 3.0 V6-24V (CAN) (2001-2004) |
|
| MPV/ Premacy 3.0 V6-24V (USA) (2001-2004) |
|
| MPV/ Premacy 3.0 V6-24V (USA) (2001-2004) |
|
| MPV/ Premacy 2.5 V6-24V (2000-2001) |
|
| MPV/ Premacy 2.5 V6-24V (2000-2001) |
|
| MPV/ Premacy 2.5 V6-24V (1999-2000) |
|
| MPV/ Premacy 2.5 V6-24V (1999-2000) |
|
Additional Notes
- The Mazda MPV/Premacy 2.5 V6-24V cooling system holds 10.2 liters as a standard fill, rising to 12 liters when the vehicle is equipped with a rear heater. The additional 1.8 liters accounts for the extra coolant volume circulating through the rear heating circuit.
- On the 2.5 V6-24V for 1999-2001, the initial service interval separates a coolant check at 30,000 miles/24 months from the first change at 45,000 miles/36 months. Subsequent changes then follow a shorter 30,000-mile/24-month cycle, meaning the drain interval tightens after the first flush.
- The 3.0 V6-24V introduced for 2001-2004 carries a slightly larger cooling system at 10.6 liters standard and 12.4 liters with a rear heater, compared to the 10.2-liter and 12-liter figures of the earlier 2.5-liter engine.
- For the 3.0 V6-24V in both USA and CAN markets covering 2001-2004, the first-change-only interval specifies a coolant change at 45,000 miles/36 months, while subsequent changes revert to 30,000 miles/24 months, mirroring the same two-phase structure seen on the 2.5 V6-24V.
- The 3.0 V6-24V for 2004-2005 shows a reduced standard capacity of 9.8 liters, down from 10.6 liters on the 2001-2004 version of the same engine. With a rear heater, the 2004-2005 figure is 11.6 liters versus 12.4 liters previously.
- Under normal use conditions, the 3.0 V6-24V for 2004-2005 specifies a coolant change at 60,000 miles/60 months, a notably longer drain interval than the 30,000-mile/24-month cycle applied to the same engine in 2001-2004.
- The first-change-only interval for the 3.0 V6-24V in 2004-2005 extends to 120,000 miles/120 months, which is a ten-year service life for the initial factory fill. A check at 30,000 miles/24 months is still specified within that extended period.
- The USA and CAN market specifications for the 3.0 V6-24V are identical in coolant capacity across all listed years. The 2001-2004 entries share the same 10.6-liter and 12.4-liter figures, and the 2004-2005 entries share the same 9.8-liter and 11.6-liter figures, with no regional divergence in volume.