Maserati Quattroporte, AM 107
Brake fluid capacity & service interval
Maserati Quattroporte, AM 107 uses brake fluid with a capacity of 2-2,5 liters. Service intervals include checking at 5000 km and changing at 20000 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Quattroporte 4200, AM 107 (1968-1970) |
|
| Quattroporte 4700, AM 107/4700 (1968-1970) |
|
| Quattroporte 4200, AM 107 (1963-1967) |
|
| Quattroporte 4700, AM 107/4700 (1963-1967) |
|
Additional Notes
- The Maserati Quattroporte AM 107 carries a brake fluid capacity of 2 to 2.5 liters across all listed configurations, a range that reflects the total volume held within a hydraulic brake system including the master cylinder reservoir, brake lines, and calipers or wheel cylinders.
- A 2 to 2.5 liter capacity figure is notably generous for a passenger car brake system of the 1960s era, suggesting a large-displacement, high-performance vehicle with an extensive hydraulic circuit.
- The check interval is set at every 5,000 km under normal use conditions, meaning the fluid level and condition in the hydraulic brake system are to be inspected at that frequency.
- The change interval is specified at 20,000 km under normal use conditions, at which point the hydraulic brake system fluid is due for a full replacement rather than a top-up.
- Both the 4200 and 4700 engine variants share identical brake fluid capacity and service interval specifications, indicating no differentiation in brake system volume or maintenance scheduling between the two displacement options.
- The specifications remain consistent across the 1963-1967 and 1968-1970 model year groupings for both the AM 107 and AM 107/4700 designations, with no variation in capacity, check interval, or change interval between the two periods.