Land Rover Range Rover Evoque, L538 (USA)

Transfer case fluid capacity & service interval

Land Rover Range Rover Evoque, L538 (USA) transfer case fluid capacity ranges from 0,4 to 0,75 liters. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Range Rover Evoque 2.0 Si4 (177 kW) AWD (2017-2019)
  • Use: Normal
  • Capacity 0,45 liter
Range Rover Evoque 2.0 Si4 (177 kW) AWD (2017-2019)
  • Use: Normal
  • Capacity 0,4 liter
  • Code: Active Driveline
Range Rover Evoque 2.0 Si4 (213 kW) AWD (2017-2019)
  • Use: Normal
  • Capacity 0,45 liter
Range Rover Evoque 2.0 Si4 (213 kW) AWD (2017-2019)
  • Use: Normal
  • Capacity 0,4 liter
  • Code: Active Driveline
Range Rover Evoque 2.0 Si4 (177 kW) AWD (2016-2017)
  • Use: Normal
  • Capacity 0,45 liter
Range Rover Evoque 2.0 Si4 (177 kW) AWD (2016-2017)
  • Use: Normal
  • Capacity 0,4 liter
  • Code: Active Driveline
Range Rover Evoque 2.0 Si4 (177 kW) AWD (2014-2016)
  • Use: Normal
  • Capacity 0,45 liter
Range Rover Evoque 2.0 Si4 (177 kW) AWD (2014-2016)
  • Use: Normal
  • Capacity 0,4 liter
  • Code: Active Driveline
Range Rover Evoque 2.0 Si4 (177 kW) AWD (2011-2014)
  • Use: Normal
  • Capacity 0,75 liter (Dry fill)

Additional Notes

  • The Land Rover Range Rover Evoque L538 (USA) 2.0 Si4 (177 kW) AWD for 2011-2014 carries a dry fill transfer case capacity of 0.75 liter, a value associated with a complete overhaul or initial factory fill where no residual fluid remains in the unit.
  • From 2014 onward, the 2.0 Si4 (177 kW) AWD transfer case specifications shift away from a single dry fill figure and instead list two separate service capacities: 0.45 liter and 0.4 liter, reflecting different fill points or compartments within the transfer box assembly.
  • The dual-capacity pattern of 0.45 liter and 0.4 liter under normal use conditions applies consistently across the 2014-2016, 2016-2017, and 2017-2019 model year ranges of the 177 kW variant, indicating a stable transfer box design across those production periods.
  • The 2.0 Si4 (213 kW) AWD variant, introduced in the 2017-2019 range, shares the same 0.45 liter and 0.4 liter transfer case capacities as the lower-output 177 kW version produced during the same years, despite the difference in engine output.
  • The 0.75 liter dry fill figure for the 2011-2014 177 kW configuration is notably larger than the combined 0.85 liter total of the two-point fill used in later years, suggesting a structural or design change in the transfer box between the early and mid-production generations.
  • All transfer case fluid specifications across the 2011-2019 range are listed under normal use conditions, with no separate severe-use interval or capacity noted in the specifications.

Other Systems