Land Rover Range Rover Evoque, L538 (USA)
Coolant capacity & service interval
Land Rover Range Rover Evoque, L538 (USA) coolant capacity ranges from 4,4 to 11,4 liters. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Range Rover Evoque 2.0 Si4 (177 kW) AWD (2017-2019) |
|
| Range Rover Evoque 2.0 Si4 (213 kW) AWD (2017-2019) |
|
| Range Rover Evoque 2.0 Si4 (177 kW) AWD (2016-2017) |
|
| Range Rover Evoque 2.0 Si4 (177 kW) AWD (2014-2016) |
|
| Range Rover Evoque 2.0 Si4 (177 kW) AWD (2011-2014) |
|
Additional Notes
- The Land Rover Range Rover Evoque L538 2.0 Si4 (177 kW) AWD produced from 2011-2014 carries a cooling system capacity of 8.4 liters, rising to 8.6 liters when the heater circuit is included in the fill.
- For the same 177 kW engine in the 2014-2016 model years, the cooling system capacity drops significantly to 4.4 liters, or 4.6 liters with the heater, a notably lower figure compared to the preceding generation's specification.
- The 2016-2017 177 kW variant introduces a distinction between dry fill and service fill values. The dry fill capacity is 8.5 liters, representing a complete system drain and refill from empty, while the service fill sits at 4.4-4.6 liters, reflecting the smaller volume exchanged during a routine coolant service.
- A dry fill capacity is the total volume the cooling system holds when completely empty, such as after an overhaul or major component replacement. A service fill is the lesser amount replaced during a standard maintenance interval without fully draining the system.
- The 2017-2019 177 kW AWD specification lists only a dry fill capacity of 11.2-11.4 liters, which is the largest dry fill figure across all 177 kW model year ranges in the L538 lineup.
- The 213 kW AWD variant introduced in 2017-2019 shares an identical dry fill capacity range of 11.2-11.4 liters with the 177 kW version of the same years, indicating no measurable difference in cooling system volume between the two power outputs for that period.
- Across the 177 kW AWD configurations spanning 2011-2019, the cooling system capacity specification has been expressed in three different formats: a single value with heater variant, a range without heater distinction, and a dry fill versus service fill split, reflecting changes in how the specification was recorded across model year updates.