Lamborghini Huracán Spyder

Additional Notes

• Across all Lamborghini Huracán Spyder variants covered, the transaxle semi-automatic transmission carries a dry fill capacity of 11.8 liters, which represents the total fluid volume required when filling a completely drained or rebuilt unit from scratch.
• The service fill capacity of 10.5 liters is consistently specified across every variant, reflecting the volume used during a routine fluid change where residual fluid remains in the torque converter or passages after draining.
• The 1.3-liter difference between the dry fill and service fill figures indicates that approximately that volume of fluid is retained within the transmission assembly during a standard service drain, a common characteristic of transaxle designs.
• A fluid level check interval of 15,000 km is specified for all variants under normal use conditions, separate from and more frequent than the full fluid change interval.
• The fluid change interval is set at 45,000 km or 36 months, whichever comes first, applying uniformly across all Huracán Spyder configurations under normal use conditions.
• The Huracán LP 610-4 Spyder and Huracán LP 580-2 Spyder share identical transmission service specifications despite representing all-wheel-drive and rear-wheel-drive configurations respectively, with both carrying the same 11.8-liter dry and 10.5-liter service fill figures.
• The Huracán EVO Spyder RWD (2020-2024) and the Huracán EVO Spyder (2019-2025) share the same capacity and interval specifications, meaning the drivetrain layout difference between the two EVO variants does not affect transmission fluid service requirements.
• The Huracán LP 640-4 Spyder Performante, despite carrying a higher power output designation than the LP 610-4 Spyder, specifies the same 45,000 km or 36-month change interval and identical fill capacities, indicating no differentiated service schedule for the performance-oriented variant.