Kia Sedona, VQ (USA / CAN)

Brake fluid capacity & service interval

Kia Sedona, VQ (USA / CAN) models require brake fluid with a capacity of 0,7 to 0,8 liters. Service intervals include checks at 5000, 7500, 15000, and 30000 miles, as well as changes at 40000 miles. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Sedona 3.5 (CAN) (2010-2014)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months
Sedona 3.5 (USA) (2010-2014)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 7500 miles/ 6 months
Sedona 3.8 (CAN) (2005-2010)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 5000 miles/ 4 months
  • Change 40000 miles/ 32 months
Sedona 3.8 (USA) (2005-2010)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 15000 miles/ 15 months
Sedona 3.8 (USA) (2005-2010)
  • Use: Severe
  • Capacity 0,7-0,8 liter
  • Check 5000 miles/ 5 months

Additional Notes

  • The hydraulic brake/clutch system capacity across all Kia Sedona VQ configurations covered here falls within a 0.7-0.8 liter range, which is consistent with a service fill level rather than a full system overhaul volume.
  • The 0.7-0.8 liter capacity figure applies uniformly to both the 3.5 and 3.8 engine variants, across both the Canadian and American market specifications, for model years 2005-2014.
  • The Sedona 3.5 (CAN) 2010-2014 carries a brake fluid check interval of 30,000 miles or 24 months under normal use, while the Sedona 3.5 (USA) covering the same years specifies a considerably shorter check interval of 7,500 miles or 6 months under the same normal use condition.
  • Among all configurations listed, the Sedona 3.8 (CAN) 2005-2010 is the only one that includes a dedicated fluid change interval, set at 40,000 miles or 32 months under normal use, in addition to a check interval of 5,000 miles or 4 months.
  • The Sedona 3.8 (USA) 2005-2010 specifications distinguish between two use conditions. Under normal use, the brake fluid check interval is 15,000 miles or 15 months, while under severe use, the same check interval shortens to 5,000 miles or 5 months.
  • The Sedona 3.8 (CAN) 2005-2010 check interval of 5,000 miles or 4 months under normal use aligns closely with the severe-use check interval specified for the Sedona 3.8 (USA) covering the same years, despite the two applying to different market and use condition designations.

Other Systems