Kia Sedona, YP (USA / CAN)

Brake fluid capacity & service interval

Kia Sedona, YP (USA / CAN) models require brake fluid with a capacity range of 0,58-0,62 liter. Service intervals include checks at 30000 miles/ 24 months and 15000 miles/ 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Sedona 3.3 (2020-2021)
  • Use: Normal
  • Capacity 0,58-0,62 liter
  • Check 15000 miles/ 24 months
Sedona 3.3 (2019-2020)
  • Use: Normal
  • Capacity 0,58-0,62 liter
  • Check 15000 miles/ 24 months
Sedona 3.3 (2014-2018)
  • Use: Normal
  • Capacity 0,58-0,62 liter
  • Check 30000 miles/ 24 months

Additional Notes

  • The Kia Sedona YP 3.3 carries a brake fluid capacity of 0.58–0.62 liter across all listed model years, a range that reflects the total volume of the hydraulic brake and clutch system rather than a partial service quantity.
  • A capacity expressed as a range rather than a fixed value is typical for hydraulic brake systems, where the reservoir level sits between a minimum and maximum mark depending on brake pad wear and fluid condition at the time of service.
  • The 2014-2018 3.3 specifies a check interval of every 30,000 miles or 24 months under normal use conditions, whichever comes first.
  • Starting with the 2019-2020 3.3, the mileage-based check interval was reduced to 15,000 miles, while the 24-month time interval remained unchanged from the earlier specification.
  • The 2020-2021 3.3 shares the same 15,000-mile and 24-month check interval as the 2019-2020 specification, with no change to the 0.58–0.62 liter capacity figure.
  • The reduction from 30,000 miles to 15,000 miles between the 2014-2018 and 2019-2021 model year groups represents a halving of the distance-based service interval, while the fluid capacity itself remained consistent across all years.

Other Systems