INFINITI Q60, V37 (EU)

Transfer case fluid capacity & service interval

INFINITI Q60, V37 (EU) transfer case fluid capacity is 1 liter. Service intervals consist of checks every 15000 km or 12 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Q60 3.0T AWD (2018-2020)
  • Use: Normal
  • Capacity 1 liter
  • Check 15000 km/ 12 months
  • Code: ETX13C
Q60 3.0T AWD (2016-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 15000 km/ 12 months
  • Code: ETX13C

Additional Notes

  • The INFINITI Q60 V37 (EU) transfer case holds 1 liter of fluid across both the 2016-2018 and 2018-2020 3.0T AWD configurations. A 1-liter capacity is characteristic of a compact transfer case unit, typical in rear-biased AWD systems where the transfer case primarily manages torque distribution rather than acting as a full-time four-wheel-drive unit.
  • The check interval for the transfer case fluid is set at 15,000 km or 12 months, whichever comes first, under normal use conditions. The dual-trigger structure of distance and time means that low-mileage operation still requires periodic attention on an annual basis.
  • The 1-liter capacity figure listed for both configurations represents a service-level reference rather than a full overhaul fill. In practice, a drain-and-fill service on a unit of this size rarely recovers the full theoretical volume, as residual fluid remains in passages and the torque coupling mechanism.
  • The 2016-2018 and 2018-2020 Q60 3.0T AWD variants share identical transfer case fluid capacity and check interval specifications. The overlap at the 2018 model year reflects a mid-cycle point where both specification entries remain applicable depending on production date.

Other Systems