INFINITI Q60, V37 (EU)

Coolant capacity & service interval

INFINITI Q60, V37 (EU) coolant capacity ranges from 0,9 liter to 10,3 liter. Service intervals include checks at 15000 km or 12 months, and changes at 60000 km or 48 months, 90000 km or 60 months, and 200000 km or 120 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Q60 2.0T (2018-2020)
  • Use: Normal
  • Capacity 9 liter
  • Capacity 0,9 liter (Reservoir)
  • Change 200000 km/ 120 months
Q60 3.0T AWD (2018-2020)
  • Use: Normal
  • Capacity 10,3 liter
  • Capacity 3,2 liter (intercooler)
  • Check 15000 km/ 12 months
  • Change 60000 km/ 48 months
Q60 3.0T AWD (2018-2020)
  • Use: First change only
  • Capacity 10,3 liter
  • Capacity 3,2 liter (intercooler)
  • Check 15000 km/ 12 months
  • Change 90000 km/ 60 months
Q60 2.0T (2016-2018)
  • Use: Normal
  • Capacity 9 liter
  • Capacity 0,9 liter (Reservoir)
  • Change 200000 km/ 120 months
Q60 3.0T AWD (2016-2018)
  • Use: Normal
  • Capacity 10,3 liter
  • Capacity 3,2 liter (intercooler)
  • Check 15000 km/ 12 months
  • Change 60000 km/ 48 months
Q60 3.0T AWD (2016-2018)
  • Use: First change only
  • Capacity 10,3 liter
  • Capacity 3,2 liter (intercooler)
  • Check 15000 km/ 12 months
  • Change 90000 km/ 60 months

Additional Notes

  • The INFINITI Q60 V37 (EU) 2.0T carries a 9-liter cooling system capacity alongside a 0.9-liter reservoir, figures that reflect a standard service fill for a four-cylinder turbocharged engine in this segment.
  • The Q60 3.0T AWD cooling system holds 10.3 liters, which is notably larger than the 2.0T, consistent with the greater thermal load produced by a twin-turbocharged V6 engine.
  • An additional 3.2-liter intercooler circuit is specified separately for the 3.0T AWD, bringing the total fluid volume across both cooling loops to 13.5 liters — a figure that reflects the dedicated charge-air cooling system present on the twin-turbo configuration.
  • The 2.0T change interval is set at 200,000 km or 120 months under normal use conditions, placing coolant service on a very long-life schedule relative to many other vehicles in the same class.
  • The 3.0T AWD specifies a standard change interval of 60,000 km or 48 months under normal use, which is considerably shorter than the 2.0T interval and aligns with the more demanding thermal environment of the twin-turbo V6 and its intercooler circuit.
  • For the 3.0T AWD under a first-change-only condition, the initial drain interval extends to 90,000 km or 60 months, suggesting the factory-fill coolant is formulated to last longer before the first service, after which the shorter 60,000 km normal interval applies.
  • The 3.0T AWD also carries a check interval of 15,000 km or 12 months, a periodic inspection requirement that has no equivalent listed for the 2.0T, reflecting the added complexity of monitoring a dual-loop cooling arrangement.
  • The 2.0T specifications are identical across the 2016-2018 and 2018-2020 model year groupings, with both sharing the same 9-liter capacity, 0.9-liter reservoir, and 200,000 km change interval under normal use.
  • Likewise, the 3.0T AWD specifications are consistent across the 2016-2018 and 2018-2020 groupings, with capacities, check intervals, and change intervals remaining unchanged between the two periods.

Other Systems