INFINITI Q60, V36 (EU)

Coolant capacity & service interval

INFINITI Q60, V36 (EU) coolant capacity ranges from 0,8 to 9,1 liters. Service intervals include checks at 15000 km or 12 months, and changes at 60000 km or 48 months and 90000 km or 60 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Q60 3.7 Convertible (2013-2016)
  • Use: Normal
  • Capacity 9,1 liter
  • Capacity 0,8 liter (Reservoir)
  • Check 15000 km/ 12 months
  • Change 60000 km/ 48 months
Q60 3.7 Convertible (2013-2016)
  • Use: First change only
  • Capacity 9,1 liter
  • Capacity 0,8 liter (Reservoir)
  • Check 15000 km/ 12 months
  • Change 90000 km/ 60 months
Q60 3.7 Coupé (2013-2016)
  • Use: Normal
  • Capacity 9,1 liter
  • Capacity 0,8 liter (Reservoir)
  • Check 15000 km/ 12 months
  • Change 60000 km/ 48 months
Q60 3.7 Coupé (2013-2016)
  • Use: First change only
  • Capacity 9,1 liter
  • Capacity 0,8 liter (Reservoir)
  • Check 15000 km/ 12 months
  • Change 90000 km/ 60 months

Additional Notes

  • The INFINITI Q60 V36 (EU) cooling system holds 9.1 liters as the main circuit capacity, which represents the total system fill volume including the engine block, cylinder head passages, and radiator.
  • A separate reservoir capacity of 0.8 liters is listed alongside the main 9.1-liter figure, reflecting the overflow or expansion tank that sits outside the primary cooling circuit.
  • Both the 3.7 Convertible and 3.7 Coupé body styles share identical cooling system capacities of 9.1 liters main and 0.8 liters reservoir across the 2013-2016 model years.
  • Under normal use conditions, the coolant change interval for both body styles is set at 60,000 km or 48 months, whichever comes first.
  • A first change only condition carries an extended change interval of 90,000 km or 60 months, applying to the initial coolant drain after the factory fill rather than subsequent service cycles.
  • The check interval of 15,000 km or 12 months applies to both use conditions across all listed configurations, meaning inspection frequency remains constant regardless of whether the normal or first change only drain schedule is followed.

Other Systems