INFINITI Q60, V36 (USA)
Coolant capacity & service interval
INFINITI Q60, V36 (USA) coolant capacity ranges from 0,8 to 8,6 liters. Service intervals include checks at 10000 miles or 12 months, and changes at 75000 miles or 60 months and 105000 miles or 84 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Q60 3.7 Convertible (2013-2015) |
|
| Q60 3.7 Convertible (2013-2015) |
|
| Q60 3.7 Coupe (2013-2015) |
|
| Q60 3.7 Coupe (2013-2015) |
|
| Q60 3.7 Coupe AWD (2013-2015) |
|
| Q60 3.7 Coupe AWD (2013-2015) |
|
Additional Notes
- Across all three body and drivetrain configurations of the INFINITI Q60 V36 (USA) 2013-2015, the cooling system capacity is 8.5 liters when paired with an automatic transmission and 8.6 liters when paired with a manual transmission. The 0.1-liter difference between the two transmission types reflects the minor variation in coolant routing or passage volume associated with each transmission's integration into the cooling circuit.
- A separate reservoir capacity of 0.8 liters is listed for all configurations. A reservoir holds overflow coolant that returns to the system as temperatures fluctuate, and at 0.8 liters, the figure represents a standard overflow buffer relative to the main system volume.
- The Convertible, Coupe, and Coupe AWD variants all share identical cooling system capacities, meaning the open-top body structure of the Convertible and the all-wheel-drive hardware of the Coupe AWD do not alter the coolant volume requirements compared to the standard rear-wheel-drive Coupe.
- Under normal use conditions, the coolant change interval is set at 75,000 miles or 60 months across all three configurations. Normal use in this context applies to the standard operating schedule as opposed to a first-change-only schedule.
- A first-change-only interval of 105,000 miles or 84 months is specified separately for all three configurations. First-change-only intervals are typically associated with factory-fill coolant formulations that carry a longer initial service life before the first drain and refill is required.
- The gap between the normal change interval of 75,000 miles and the first-change-only interval of 105,000 miles represents a 30,000-mile or 24-month extension for the initial factory fill. After the first change, subsequent intervals would follow the normal schedule of 75,000 miles or 60 months.
- A coolant check interval of 10,000 miles or 12 months is listed for all configurations under both use conditions. A check interval shorter than the change interval allows for monitoring of coolant level, concentration, and condition without requiring a full system drain.