INEOS Grenadier
Transfer case fluid capacity & service interval
INEOS Grenadier transfer case fluid capacity varies by configuration, with values of 1.8 liters for service fill and 2.64 liters for dry fill with oil cooler. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Grenadier 3.0 Ti 4x4 (2022- ) |
|
| Grenadier 3.0 TTD 4x4 (2022- ) |
|
Additional Notes
- The INEOS Grenadier transfer case fluid specifications cover two configurations starting from 2022: the 3.0 TTD 4x4 and the 3.0 Ti 4x4, both sharing identical capacity figures for the transferbox.
- A service fill capacity of 1.8 liters applies to both the 3.0 TTD 4x4 and 3.0 Ti 4x4 under normal use conditions. A service fill represents the amount of fluid added during a routine fluid change, where residual fluid remains in the unit.
- The dry fill capacity with oil cooler is listed at 2.64 liters for both configurations. A dry fill figure reflects the total fluid volume required when filling a completely empty transfer case, such as after a full overhaul or component replacement.
- The gap between the 1.8-liter service fill and the 2.64-liter dry fill with oil cooler indicates that approximately 0.84 liters of fluid is retained in the transfer case and oil cooler circuit during a standard drain-and-fill service on either the 3.0 TTD 4x4 or 3.0 Ti 4x4.
- Both the diesel 3.0 TTD 4x4 and the petrol 3.0 Ti 4x4 share the same transfer case fluid capacities, meaning the engine type does not influence the transferbox fluid volume in the Grenadier for the 2022 starting year.