IKCO Soren
Manual transmission fluid capacity & service interval
IKCO Soren requires manual transmission fluid with a capacity of 1,9 liters. Service intervals include normal use. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Soren 1.7i (2009- ) |
|
| Soren 1.7i CNG (2009- ) |
|
| Soren 1.6 (2007- ) |
|
| Soren 1.7 Turbo (2007- ) |
|
| Soren 1.8 (2007- ) |
|
Additional Notes
- The IKCO Soren manual transaxle holds 1.9 liters of fluid across all five listed configurations, covering the 1.6, 1.7 Turbo, 1.7i, 1.7i CNG, and 1.8 engine variants.
- A transaxle is a combined transmission and axle assembly, meaning the 1.9-liter figure represents the total fluid capacity for a single integrated unit rather than separate gearbox and differential fills.
- All five configurations carry a normal use condition designation, which in service specifications typically refers to standard driving cycles as opposed to severe or heavy-duty operating conditions.
- The 1.6 and 1.8 petrol variants share the same 1.9-liter transaxle capacity as the turbocharged 1.7, indicating no capacity differentiation between naturally aspirated and forced-induction drivetrains in the Soren lineup.
- The 1.7i CNG variant, which runs on compressed natural gas, carries the same 1.9-liter manual transaxle specification as the petrol-fueled configurations, reflecting no mechanical distinction in the transmission assembly between fuel types.
- The 1.7i and 1.7i CNG configurations share a starting year of 2009, while the 1.6, 1.7 Turbo, and 1.8 variants carry a starting year of 2007, placing the introduction of the 1.7i family two years after the initial Soren manual transmission range.