Hyundai Veracruz, EN (USA)

Coolant capacity & service interval

Hyundai Veracruz, EN (USA) coolant capacity is 10,5 liters. Service intervals include 30000 miles/24 months, 60000 miles/60 months, and 120000 miles/120 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Veracruz 3.8 4x2 (2010-2012)
  • Use: Normal
  • Capacity 10,5 liter
  • Change 30000 miles/ 24 months
Veracruz 3.8 4x2 (2010-2012)
  • Use: Initial service
  • Capacity 10,5 liter
  • Change 120000 miles/ 120 months
Veracruz 3.8 4x4 (2010-2012)
  • Use: Normal
  • Capacity 10,5 liter
  • Change 30000 miles/ 24 months
Veracruz 3.8 4x4 (2010-2012)
  • Use: Initial service
  • Capacity 10,5 liter
  • Change 120000 miles/ 120 months
Veracruz 3.8 4x2 (2007-2010)
  • Use: Normal
  • Capacity 10,5 liter
  • Change 30000 miles/ 24 months
Veracruz 3.8 4x2 (2007-2010)
  • Use: Initial service
  • Capacity 10,5 liter
  • Change 60000 miles/ 60 months
Veracruz 3.8 4x4 (2007-2010)
  • Use: Normal
  • Capacity 10,5 liter
  • Change 30000 miles/ 24 months
Veracruz 3.8 4x4 (2007-2010)
  • Use: Initial service
  • Capacity 10,5 liter
  • Change 60000 miles/ 60 months

Additional Notes

  • The Hyundai Veracruz EN (USA) cooling system capacity is 10.5 liters across all listed configurations, covering both 4x2 and 4x4 drivetrains for the full 2007-2012 span.
  • A 10.5-liter cooling system capacity is consistent with a larger displacement engine installation, reflecting the volume needed to circulate coolant through the 3.8-liter V6 engine block, cylinder heads, and associated passages.
  • All configurations share a normal-use change interval of 30,000 miles or 24 months, meaning routine coolant replacement falls on whichever of those two thresholds arrives first under standard operating conditions.
  • The 2007-2010 3.8 4x2 and 4x4 configurations carry an initial service interval of 60,000 miles or 60 months, which represents the first scheduled coolant change from the factory fill before the normal 30,000-mile/24-month cycle takes over.
  • For the 2010-2012 3.8 4x2 and 4x4 configurations, the initial service interval extends considerably to 120,000 miles or 120 months, doubling both the mileage and time thresholds compared to the 2007-2010 initial service specification.
  • The shift from a 60,000-mile/60-month initial service interval in 2007-2010 to a 120,000-mile/120-month interval in 2010-2012 applies equally to both the 4x2 and 4x4 variants, indicating the change is tied to the model year revision rather than the drivetrain configuration.
  • An extended initial service interval of 120,000 miles or 120 months is typically associated with a long-life coolant formulation used as the factory fill, which is engineered to maintain corrosion inhibitor effectiveness over a significantly longer service period than conventional coolant.

Other Systems