Hyundai Veracruz, EN (USA)

Automatic transmission fluid capacity & service interval

Hyundai Veracruz, EN (USA) automatic transmission fluid capacity is 7 liter. Service intervals include checking at 37500 miles or 30 months and changing at 60000 miles. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Veracruz 3.8 4x2 (2010-2012)
  • Use: Normal
  • Capacity 7 liter
  • Code: F21 6/1
Veracruz 3.8 4x2 (2010-2012)
  • Use: Severe
  • Capacity 7 liter
  • Change 60000 miles
  • Code: F21 6/1
Veracruz 3.8 4x4 (2010-2012)
  • Use: Normal
  • Capacity 7 liter
  • Code: F21 6/1
Veracruz 3.8 4x4 (2010-2012)
  • Use: Severe
  • Capacity 7 liter
  • Change 60000 miles
  • Code: F21 6/1
Veracruz 3.8 4x2 (2007-2010)
  • Use: Normal
  • Capacity 7 liter
  • Check 37500 miles/ 30 months
  • Code: F21 6/1
Veracruz 3.8 4x4 (2007-2010)
  • Use: Normal
  • Capacity 7 liter
  • Check 37500 miles/ 30 months
  • Code: F21 6/1

Additional Notes

  • The Hyundai Veracruz EN carries a 7-liter automatic transaxle fluid capacity across all configurations in the 2007-2012 model range, covering both 4x2 and 4x4 drivetrains.
  • A 7-liter figure for an automatic transaxle represents a service fill volume, meaning the amount of fluid used during a routine drain-and-fill service rather than a complete overhaul, which would typically require a higher total system volume.
  • The 4x2 and 4x4 variants share an identical 7-liter transaxle capacity, indicating no difference in fluid volume requirements between the two drivetrain configurations.
  • For the 2007-2010 model years, both the 4x2 and 4x4 configurations specify a fluid check interval of 37,500 miles or 30 months under normal use conditions.
  • The 37,500-mile or 30-month check interval for 2007-2010 models is a fluid level inspection interval, not a change interval, meaning the fluid is examined for condition and level rather than replaced on a fixed schedule under normal use.
  • For 2010-2012 models under severe use conditions, both the 4x2 and 4x4 configurations specify a fluid change at 60,000 miles, which is a replacement interval rather than an inspection point.
  • The 2010-2012 normal use rows carry no mileage or time interval alongside the 7-liter capacity figure, while the severe use rows for the same years specify the 60,000-mile change interval.
  • The shift from a check-based interval in 2007-2010 to a change-based interval under severe use in 2010-2012 reflects a structural difference in how service requirements are expressed across the two model year groupings.

Other Systems