Hyundai Santa Fe, TM (EU)

Additional Notes

• The Hyundai Santa Fe TM (EU) manual transaxle fluid capacity is listed as a range of 1.8–1.9 liters across all configurations in the 2018-2020 model years, which is typical of a service fill specification rather than a full overhaul or dry-fill volume.
• A capacity expressed as a range rather than a fixed value generally reflects normal variation during a fluid top-up or drain-and-refill procedure, where residual fluid in the transaxle housing accounts for the spread between the lower and upper figures.
• Under normal use conditions, the service schedule calls for a fluid check at 48 months or 60,000 km, whichever comes first, rather than a full fluid change at that interval.
• Under severe use conditions, the specification shifts from a periodic check to an outright fluid change at 120,000 km, indicating a higher standard of maintenance is applied when operating demands are greater.
• The 2.0 CRDI, 2.2 CRDI, and 2.4 GDI engine variants all share the same 1.8–1.9 liter transaxle capacity, meaning displacement and fuel system type do not produce any variation in the manual transaxle fluid volume for the 2018-2020 Santa Fe TM.
• Both two-wheel-drive and 4WD configurations across the diesel and petrol engine lines carry the same manual transaxle fluid capacity of 1.8–1.9 liters, with identical check and change intervals under their respective use conditions.
• The 2.4 GDI engine is listed exclusively in a 4WD configuration within the 2018-2020 specifications, while the 2.0 CRDI and 2.2 CRDI engines each appear in both standard and 4WD variants.