Hyundai Santa Fe, TM (EU)
Clutch fluid capacity & service interval
Hyundai Santa Fe, TM (EU) clutch fluid capacity is 2,45-2,5 liters. Service intervals include checking every 48 months or 60000 km and changing every 100000 km. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- All configurations listed across the 2.2 CRDI variants share a clutch fluid capacity range of 2.45-2.5 liters, applying equally to both two-wheel-drive and 4WD versions of the Hyundai Santa Fe TM (EU).
- The 0.05-liter spread in the stated capacity figure (2.45-2.5 liters) reflects a service fill tolerance rather than a fixed volume, which is typical of hydraulic clutch actuator systems where slight variation in reservoir level is acceptable within a defined range.
- Under normal use conditions, the specification calls for a fluid check at 48 months or 60,000 km, with no fluid change interval listed, meaning inspection alone satisfies the maintenance requirement in non-demanding operating environments.
- Under severe use conditions, the check interval is expressed as 60,000 km or 48 months, and a fluid change is additionally required at 100,000 km, making the severe-use schedule more demanding in terms of total service actions.
- The distinction between normal and severe use conditions produces a meaningful difference in service obligations: normal use requires only periodic checks, while severe use adds a mandatory fluid replacement at the 100,000 km mark.
- The 2.2 CRDI engine appears in two output variants across the covered years: 148 kW for the 2020-2022 period and 142 kW for the 2022-2024 period, yet both share identical clutch fluid capacity and service interval specifications.
- The hydraulic clutch actuator note applies uniformly across all eight rows, indicating that the clutch fluid system in question operates on hydraulic actuation principles rather than a cable-based mechanism, which is consistent with the use of a dedicated fluid reservoir and defined capacity values.
- The 4WD variants for both the 148 kW (2020-2022) and 142 kW (2022-2024) engines carry the same clutch fluid specifications as their two-wheel-drive counterparts, with no capacity or interval differences attributable to the addition of all-wheel-drive hardware.