Hyundai i30 N, PDEN (EU)

Manual transmission fluid capacity & service interval

Hyundai i30 N, PDEN (EU) manual transmission fluid capacity is 1,8-1,9 liters. Service intervals include checking every 48 months or 60000 km and changing every 120000 km. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
i30 N 2.0 T-GDI (184 kW) (2020- )
  • Use: Normal
  • Capacity 1,8-1,9 liter
  • Check 48 months/ 60000 km
  • Code: M6GF2 6/1
i30 N 2.0 T-GDI (184 kW) (2020- )
  • Use: Severe
  • Capacity 1,8-1,9 liter
  • Check 60000 km/ 48 months
  • Change 120000 km
  • Code: M6GF2 6/1
i30 N 2.0 T-GDI (206 kW) (2020- )
  • Use: Normal
  • Capacity 1,8-1,9 liter
  • Check 48 months/ 60000 km
  • Code: M6GF2 6/1
i30 N 2.0 T-GDI (206 kW) (2020- )
  • Use: Severe
  • Capacity 1,8-1,9 liter
  • Check 60000 km/ 48 months
  • Change 120000 km
  • Code: M6GF2 6/1
i30 N 2.0 T-GDI (184 kW) (2017-2019)
  • Use: Normal
  • Capacity 1,8-1,9 liter
  • Check 48 months/ 60000 km
  • Code: M6GF2 6/1
i30 N 2.0 T-GDI (184 kW) (2017-2019)
  • Use: Severe
  • Capacity 1,8-1,9 liter
  • Check 60000 km/ 48 months
  • Change 120000 km
  • Code: M6GF2 6/1
i30 N 2.0 T-GDI (202 kW) (2017-2020)
  • Use: Normal
  • Capacity 1,8-1,9 liter
  • Check 48 months/ 60000 km
  • Code: M6GF2 6/1
i30 N 2.0 T-GDI (202 kW) (2017-2020)
  • Use: Severe
  • Capacity 1,8-1,9 liter
  • Check 60000 km/ 48 months
  • Change 120000 km
  • Code: M6GF2 6/1

Additional Notes

  • The Hyundai i30 N PDEN manual transaxle holds 1.8-1.9 liters of fluid across all four engine variants covered by the specifications, meaning the stated range reflects a service fill tolerance rather than a distinction between drain-and-fill and full overhaul quantities.
  • The 184 kW 2.0 T-GDI variant spanning 2017-2019 carries a normal-use check interval of 48 months or 60,000 km, whichever comes first, with no fluid change requirement listed under that condition.
  • Under severe use, the same 184 kW 2017-2019 engine specifies a check at 60,000 km or 48 months alongside a mandatory fluid change at 120,000 km, introducing a replacement obligation absent from the normal-use schedule.
  • The 184 kW variant from 2020 onward shares the identical 1.8-1.9 liter capacity and the same check and change intervals as the 2017-2019 version of the same output rating, indicating continuity in transaxle service requirements across that production boundary.
  • The 202 kW 2.0 T-GDI covering 2017-2020 also specifies 1.8-1.9 liters and mirrors the interval structure of the 184 kW variants, with a normal-use check at 48 months or 60,000 km and a severe-use change at 120,000 km.
  • The 206 kW 2.0 T-GDI introduced from 2020 onward retains the 1.8-1.9 liter capacity figure, and the severe-use 120,000 km change interval applies to the transaxle fluid on that variant as well.
  • Across all eight specification rows, the severe-use check interval is expressed with distance listed before time, at 60,000 km or 48 months, while the normal-use check reverses that order to 48 months or 60,000 km, reflecting a difference in how the priority trigger is presented between the two use conditions.

Other Systems