Hyundai i10, PA (EU)
Power steering fluid capacity & service interval
Hyundai i10, PA (EU) uses power steering fluid with a capacity range between min and max. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| i10 1.25i (2010-2013) |
|
| i10 1.2i (2010-2013) |
|
| i10 1.1 CRDi (2008-2010) |
|
| i10 1.1 CRDi DPF (2008-2010) |
|
| i10 1.25i (2008-2010) |
|
Additional Notes
- Across all five configurations of the Hyundai i10 PA (EU) covered here, the power steering fluid specification is expressed as a level range rather than a fixed volume, with the reservoir to be filled between the minimum and maximum marks.
- A level-based specification of this kind is standard for hydraulic power steering reservoirs, where the correct fill point depends on the fluid already present in the system rather than a measured top-up quantity.
- The 1.1 CRDi and 1.1 CRDi DPF variants, both spanning 2008-2010, share the same between-min-and-max specification as the petrol configurations, indicating no diesel-specific deviation in power steering fluid level guidance.
- The 1.25i engine appears across two separate year ranges, 2008-2010 and 2010-2013, and carries the same level-based specification in both, reflecting continuity in the power steering system across the mid-generation period.
- The 1.2i variant, introduced in the 2010-2013 range alongside the later 1.25i, also follows the between-min-and-max specification, meaning the larger displacement petrol engine does not alter the fluid level guidance.
- All five rows are designated under normal use conditions, meaning the level specification applies to standard operating environments without a separate severe-use interval or fill quantity defined.