Hyundai Grandeur / Azera / i55, HG (EU)

Automatic transmission fluid capacity & service interval

Hyundai Grandeur / Azera / i55, HG (EU) automatic transmission fluid capacity ranges from 7,1 to 7,8 liters. The service interval is 90000 km. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Grandeur / Azera / i55 2.4 MPI (2012-2017)
  • Use: Normal
  • Capacity 7,1 liter
  • Code: A6MF1 6/1
Grandeur / Azera / i55 2.4 MPI (2012-2017)
  • Use: Severe
  • Capacity 7,1 liter
  • Change 90000 km
  • Code: A6MF1 6/1
Grandeur / Azera / i55 2.4 GDI (2011-2013)
  • Use: Normal
  • Capacity 7,1 liter
  • Code: 6/1
Grandeur / Azera / i55 2.4 GDI (2011-2013)
  • Use: Severe
  • Capacity 7,1 liter
  • Change 90000 km
  • Code: 6/1
Grandeur / Azera / i55 3.0 V6 (184 kW) (2011-2017)
  • Use: Normal
  • Capacity 7,8 liter
  • Code: A6LF1 6/1
Grandeur / Azera / i55 3.0 V6 (184 kW) (2011-2017)
  • Use: Severe
  • Capacity 7,8 liter
  • Change 90000 km
  • Code: A6LF1 6/1
Grandeur / Azera / i55 3.0 V6 GDI (199 kW) (2011-2013)
  • Use: Normal
  • Capacity 7,8 liter
  • Code: 6/1
Grandeur / Azera / i55 3.0 V6 GDI (199 kW) (2011-2013)
  • Use: Severe
  • Capacity 7,8 liter
  • Change 90000 km
  • Code: 6/1

Additional Notes

  • The Hyundai Grandeur / Azera / i55 (HG) automatic transaxle capacity splits into two distinct values depending on engine displacement: the four-cylinder 2.4-liter variants hold 7.1 liters, while all 3.0-liter V6 variants hold 7.8 liters.
  • The 0.7-liter difference between the four-cylinder and V6 transaxle capacities reflects the greater fluid volume required to service the larger transmission assembly paired with a higher-output drivetrain.
  • Across all four engine configurations covered in the specifications, the normal use condition carries no listed change interval, meaning no mileage-based service point is specified for standard operating conditions.
  • Under severe use conditions, all four engine configurations share an identical ATF change interval of 90,000 km, regardless of whether the engine is a 2.4 GDI, 2.4 MPI, 3.0 V6 at 184 kW, or 3.0 V6 GDI at 199 kW.
  • The 2.4 GDI and 3.0 V6 GDI (199 kW) configurations share a production window of 2011-2013, while the 2.4 MPI and 3.0 V6 (184 kW) configurations span a longer range beginning in 2011-2012 and running through 2017.
  • Both 3.0-liter V6 variants, despite differing in output by 15 kW (184 kW versus 199 kW), carry the same automatic transaxle fluid capacity of 7.8 liters and the same severe-use change interval of 90,000 km.
  • The 7.1-liter and 7.8-liter figures listed across all rows represent service fill capacities for the automatic transaxle, which typically account for the fluid retained within the torque converter, valve body, and transmission passages during a standard drain-and-refill procedure.

Other Systems