Hyundai Grandeur / Azera, TG (EU)
Automatic transmission fluid capacity & service interval
Hyundai Grandeur / Azera, TG (EU) automatic transmission fluid capacity is 10,9 liters. Service intervals include checks every 15000 km or 12 months, and changes every 45000 km or 36 months and 90000 km or 72 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Grandeur / Azera 2.2 CRDi DPF (2006-2011) |
|
| Grandeur / Azera 3.3i V6 (2006-2011) |
|
| Grandeur / Azera 3.3i V6 (2006-2011) |
|
| Grandeur / Azera 3.8i V6 (2006-2011) |
|
| Grandeur / Azera 3.8i V6 (2006-2011) |
|
Additional Notes
- The Hyundai Grandeur / Azera TG (EU) automatic transaxle holds 10.9 liters of fluid across all engine variants in the 2006-2011 range, covering the 2.2 CRDi DPF, 3.3i V6, and 3.8i V6 configurations.
- A 10.9-liter figure for an automatic transaxle represents a total system fill, accounting for fluid held within the torque converter, valve body, and internal passages, rather than a simple pan-drain service quantity.
- The 3.3i V6 and 3.8i V6 share identical service intervals under normal use conditions: a fluid check every 15,000 km or 12 months, and a full fluid change every 90,000 km or 72 months.
- Under severe use conditions, the fluid change interval for both the 3.3i V6 and 3.8i V6 is halved to 45,000 km or 36 months, while the check interval of 15,000 km or 12 months remains unchanged.
- The 90,000 km or 72-month change interval under normal use represents a 6-year or roughly 90,000 km service cycle, which places the fluid in long-life territory relative to many conventional automatic transmission service schedules.
- The severe use change interval of 45,000 km or 36 months for the V6 variants is exactly half the normal use interval in both distance and time, reflecting a proportional adjustment rather than an independently derived figure.
- The 2.2 CRDi DPF row lists only a capacity value of 10.9 liters with no check or change interval data present in the specifications.