Hyundai Grand Santa Fe, NC (EU)
Coolant capacity & service interval
Hyundai Grand Santa Fe, NC (EU) coolant capacity ranges from 9,1 to 9,3 liters. Service intervals include changes at 30000 km/ 24 months and 210000 km/ 120 months, with checks at 60000 km/ 48 months. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Grand Santa Fe 2.2 CRDi (2014-2018) |
|
| Grand Santa Fe 2.2 CRDi (2014-2018) |
|
| Grand Santa Fe 2.2 CRDi DPF (2014-2018) |
|
| Grand Santa Fe 2.2 CRDi DPF (2014-2018) |
|
| Grand Santa Fe 3.0 GDI (2014-2016) |
|
| Grand Santa Fe 3.0 GDI (2014-2016) |
|
| Grand Santa Fe 3.3 MPi (2014-2018) |
|
| Grand Santa Fe 3.3 MPi (2014-2018) |
|
Additional Notes
- The Hyundai Grand Santa Fe NC (EU) cooling system capacity across all listed engine variants falls within a 9.1–9.3 liter range, which is consistent with a full cooling system service fill rather than a partial top-up or component-level refill.
- The 2.2 CRDi and 2.2 CRDi DPF variants share an identical capacity range of 9.1–9.3 liters, while the 3.0 GDI and 3.3 MPi petrol engines are each listed at a fixed 9.1 liters, placing the diesel variants at a slightly broader specified range.
- Under normal use conditions, all four engine variants share the same coolant change interval of 30,000 km or 24 months, whichever comes first.
- The 2.2 CRDi and 2.2 CRDi DPF rows carry an initial service designation for their extended-interval schedule, meaning the long-interval coolant check at 60,000 km or 48 months and the change at 210,000 km or 120 months apply from the first service event under that classification.
- The 3.0 GDI and 3.3 MPi petrol variants use a first change only designation for the same extended schedule, indicating the 210,000 km or 120-month change interval applies specifically to the first coolant replacement rather than as a recurring cycle.
- A coolant check interval of 60,000 km or 48 months appears in both the initial service rows for the diesel variants and the first change only rows for the petrol variants, preceding the full change interval in each case.
- The 3.0 GDI engine is listed for the 2014-2016 period, a shorter span than the 2014-2018 range shared by the 2.2 CRDi, 2.2 CRDi DPF, and 3.3 MPi variants.
- The DPF suffix on the 2.2 CRDi DPF variant denotes the presence of a diesel particulate filter, yet the cooling system capacity and all service intervals for that variant are identical to the standard 2.2 CRDi, indicating no cooling system differentiation between the two diesel configurations.