Hyundai Elantra GT, GD (USA)

Manual transmission fluid capacity & service interval

Hyundai Elantra GT, GD (USA) manual transmission fluid capacity ranges from 1,9 to 2 liters. Service intervals include checking at 37500 miles or 30 months and changing at 75000 miles. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Elantra GT 2.0 GDI (2015-2017)
  • Use: Normal
  • Capacity 1,9-2 liter
  • Check 37500 miles/ 30 months
  • Code: M6CF3-1 6/1
Elantra GT 2.0 GDI (2015-2017)
  • Use: Severe
  • Capacity 1,9-2 liter
  • Check 37500 miles/ 30 months
  • Change 75000 miles
  • Code: M6CF3-1 6/1
Elantra GT 2.0 GDI (2014-2015)
  • Use: Normal
  • Capacity 1,9 liter
  • Check 37500 miles/ 30 months
  • Code: M6CF3-1 6/1
Elantra GT 2.0 GDI (2014-2015)
  • Use: Severe
  • Capacity 1,9 liter
  • Check 37500 miles/ 30 months
  • Change 75000 miles
  • Code: M6CF3-1 6/1
Elantra GT 1.8 MPI (2013-2013)
  • Use: Normal
  • Capacity 1,9 liter
  • Check 37500 miles/ 30 months
  • Code: M6CF3-1 6/1
Elantra GT 1.8 MPI (2013-2013)
  • Use: Severe
  • Capacity 1,9 liter
  • Check 37500 miles/ 30 months
  • Change 75000 miles
  • Code: M6CF3-1 6/1

Additional Notes

  • The Hyundai Elantra GT manual transaxle fluid capacity is listed as 1.9 liters for both the 1.8 MPI (2013) and the 2.0 GDI in its 2014-2015 specification entry, placing both engines within the same fill volume for service purposes.
  • The 2.0 GDI configuration covering 2015-2017 carries a slightly wider capacity range of 1.9 to 2.0 liters, which reflects a service fill tolerance rather than a fixed single value, meaning the acceptable fluid quantity spans a 0.1-liter window.
  • Across all listed configurations, the fluid check interval is set at 37,500 miles or 30 months, whichever comes first, and applies equally under both normal and severe use conditions.
  • A fluid change interval of 75,000 miles appears exclusively under the severe use condition for all three engine and year configurations, while no change interval is listed under normal use, meaning normal use carries only a check requirement at the 37,500-mile mark.
  • The 1.8 MPI engine is represented solely by the 2013 model year in the specifications, whereas the 2.0 GDI engine spans two overlapping year ranges: 2014-2015 and 2015-2017, with 2015 appearing in both entries and carrying different capacity values between them.
  • The capacity shift from a fixed 1.9 liters in the 2014-2015 2.0 GDI entry to a 1.9-2.0 liter range in the 2015-2017 entry suggests a specification revision was introduced at some point during the 2015 model year production cycle.

Other Systems