Hyundai Elantra GT, GD (USA)
Brake fluid capacity & service interval
Hyundai Elantra GT, GD (USA) requires brake fluid with a capacity of 0,7-0,8 liter. Service intervals consist of checks every 30000 miles or 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Elantra GT 2.0 GDI (2015-2017) |
|
| Elantra GT 2.0 GDI (2014-2015) |
|
| Elantra GT 1.8 MPI (2013-2013) |
|
Additional Notes
- The Hyundai Elantra GT (GD, USA) brake fluid capacity is specified as a range of 0.7–0.8 liter across all listed configurations, which reflects the total volume held within the hydraulic brake and clutch system reservoir and lines rather than a single fixed fill point.
- The 0.7–0.8 liter range applies uniformly to the 1.8 MPI (2013) and both 2.0 GDI entries (2014-2017), indicating no variation in hydraulic system capacity between the two engine displacements.
- The check interval is set at 30,000 miles or 24 months under normal use conditions, meaning the fluid level and condition are to be inspected at whichever threshold arrives first.
- A 24-month time-based interval alongside the 30,000-mile mileage threshold reflects the hygroscopic nature of brake fluid, which absorbs moisture over time regardless of distance driven, making calendar-based checks relevant even for lower-mileage vehicles.
- All three rows carry a normal use condition designation, meaning the 30,000-mile or 24-month check interval is not adjusted for severe driving patterns such as frequent towing, mountainous terrain, or repeated hard braking.
- The shared note of "hydraulic brake/clutch system" across all configurations indicates the same fluid reservoir services both the braking and manual clutch actuation circuits, which is a common arrangement in vehicles equipped with a hydraulic clutch.