Hyundai Elantra Coupé, JK (USA)

Automatic transmission fluid capacity & service interval

Hyundai Elantra Coupé, JK (USA) automatic transmission fluid capacity ranges from 7,1 to 7,3 liters. Service intervals occur at 60000 miles. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Elantra Coupé 1.8 MPI (2013-2014)
  • Use: Normal
  • Capacity 7,3 liter
  • Code: A6GF1 6/1
Elantra Coupé 1.8 MPI (2013-2014)
  • Use: Severe
  • Capacity 7,3 liter
  • Change 60000 miles
  • Code: A6GF1 6/1
Elantra Coupé 2.0 GDI (2013-2014)
  • Use: Normal
  • Capacity 7,1 liter
  • Code: A6MF1-1 6/1
Elantra Coupé 2.0 GDI (2013-2014)
  • Use: Severe
  • Capacity 7,1 liter
  • Change 60000 miles
  • Code: A6MF1-1 6/1

Additional Notes

  • The 1.8 MPI automatic transaxle carries a fluid capacity of 7.3 liters, while the 2.0 GDI automatic transaxle holds 7.1 liters, placing both figures in the range typical of a full system fill rather than a partial drain-and-refill service.
  • The Hyundai Elantra Coupé JK specifies a 60,000-mile automatic transmission fluid change interval under severe use conditions for both the 1.8 MPI and 2.0 GDI engines across the 2013-2014 model years.
  • Under normal use conditions, neither the 1.8 MPI nor the 2.0 GDI configuration lists a change interval, with only the fluid capacity of 7.3 liters and 7.1 liters recorded respectively for those rows.
  • The 0.2-liter difference in automatic transaxle capacity between the 1.8 MPI and 2.0 GDI variants reflects a measurable distinction between the two drivetrains, which is relevant when determining the correct service fill volume for each engine type.
  • The severe use change interval of 60,000 miles applies equally to both engine variants, indicating a shared service threshold across the two configurations despite the difference in transaxle fluid capacity.

Other Systems