Hyundai Azera, TG (USA)

Brake fluid capacity & service interval

Hyundai Azera, TG (USA) models utilize brake fluid with a capacity range between min and max. Service intervals occur every 30000 miles or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Azera 3.3 (2010-2011)
  • Use: Normal
  • Between min and max.
  • Check 30000 miles/ 24 months
Azera 3.8 (2010-2011)
  • Use: Normal
  • Between min and max.
  • Check 30000 miles/ 24 months
Azera 3.3 (2008-2010)
  • Use: Normal
  • Between min and max.
  • Check 30000 miles/ 24 months
Azera 3.8 (2007-2010)
  • Use: Normal
  • Between min and max.
  • Check 30000 miles/ 24 months
Azera 3.8 (2006-2006)
  • Use: Normal
  • Between min and max.
  • Check 30000 miles/ 24 months

Additional Notes

  • Across all listed configurations of the Hyundai Azera TG, the brake fluid specification calls for the level to be maintained between the minimum and maximum marks on the reservoir, which is a standard level-based check rather than a measured fill volume.
  • The 3.3-liter engine configurations cover two overlapping model year ranges, 2008-2010 and 2010-2011, both sharing the same hydraulic brake system check interval of 30,000 miles or 24 months under normal use conditions.
  • The 3.8-liter engine appears across three separate year groupings: a single 2006 entry, a 2007-2010 range, and a 2010-2011 range, all specifying the same 30,000-mile or 24-month inspection interval under normal use conditions.
  • The dual-interval structure of 30,000 miles or 24 months means whichever threshold arrives first under normal use conditions would trigger a brake fluid level inspection, reflecting both distance-based and time-based degradation factors.
  • All five rows are designated for normal use conditions, meaning the 30,000-mile or 24-month interval applies specifically to standard operating circumstances rather than severe or demanding driving environments.
  • The specification describes a hydraulic brake system across every listed configuration, which is consistent with a conventional brake fluid reservoir that relies on fluid pressure to actuate braking components.

Other Systems