GWM Hover H3

Transfer case fluid capacity & service interval

GWM Hover H3 transfer case fluid capacity ranges from 1,2 to 2,4 liters. Service intervals require a change every 16000 km. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Hover 2.5 TCT AWD (2008-2012)
  • Use: Normal
  • Capacity 2,4 liter
  • Change 16000 km
Hover 2.8 TC AWD (2006-2010)
  • Use: Normal
  • Capacity 1,2 liter
  • Change 16000 km

Additional Notes

  • The GWM Hover H3 2.5 TCT AWD transfer case holds 2.4 liters of fluid, which is a notably larger fill volume compared to the 2.8 TC AWD variant, indicating a physically larger or more complex transfer case unit in the 2.5 TCT drivetrain.
  • The 2.8 TC AWD transfer case capacity is rated at 1.2 liters, roughly half the volume of the 2.5 TCT AWD, reflecting a difference in transfer case design between the two engine configurations.
  • Both AWD variants share an identical fluid change interval of 16,000 km under normal use conditions, meaning neither configuration calls for a more frequent service schedule despite the significant difference in fluid capacity.
  • The 2.5 TCT AWD specification applies to the 2008-2012 model years, while the 2.8 TC AWD specification covers 2006-2010, meaning there is a period from 2006-2007 where only the 2.8 TC AWD transfer case specification is represented.
  • Both transfer case specifications are designated for normal use conditions, meaning the 16,000 km change interval is not a shortened severe-duty schedule but rather the standard operating interval for typical driving demands.

Other Systems