GWM Hover H3

Automatic transmission fluid capacity & service interval

GWM Hover H3 automatic transmission fluid capacity ranges from 4,5 liters to 9 liters. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Hover 2.4 (93 kW), CC6460K (2006-2009)
  • Use: Normal
  • Capacity 9 liter (Dry fill)
  • Capacity 4,5 liter (Service fill)
  • Code: M88 4/1
Hover 2.4 AWD (93 kW), CC6460KY (2006-2009)
  • Use: Normal
  • Capacity 9 liter (Dry fill)
  • Capacity 4,5 liter (Service fill)
  • Code: M88 4/1

Additional Notes

  • The GWM Hover H3 2.4 (93 kW) CC6460K carries a dry fill capacity of 9 liters for the automatic transmission, a figure that reflects the total fluid volume required when filling a completely drained or rebuilt unit, including the torque converter and all internal passages.
  • The service fill capacity for the CC6460K automatic transmission stands at 4.5 liters, representing exactly half the dry fill volume. A service fill applies to a routine fluid change where residual fluid remains in the torque converter after draining the pan alone.
  • The 2.4 AWD (93 kW) CC6460KY variant shares identical automatic transmission capacities with the two-wheel-drive CC6460K, with a dry fill of 9 liters and a service fill of 4.5 liters across the 2006-2009 model years.
  • Both the CC6460K and CC6460KY specifications are listed under normal use conditions, meaning the stated capacities apply to standard operating environments rather than severe-duty cycles.

Other Systems