Genesis GV80 (USA)
Transfer case fluid capacity & service interval
Genesis GV80 (USA) transfer case fluid capacity is 1,3 liters. Service intervals include normal use. Data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| GV80 2.5 T-GDI (2020- ) |
|
| GV80 2.5 T-GDI AWD (2020- ) |
|
| GV80 3.5 T-GDI AWD (2020- ) |
|
Additional Notes
- The Genesis GV80 (USA) transfer case fluid capacity is 1.3 liters across all three listed configurations: the 2.5 T-GDI, the 2.5 T-GDI AWD, and the 3.5 T-GDI AWD, each starting from 2020.
- A 1.3-liter transfer case capacity falls within the range typical of compact-to-midsize SUV transfer units, reflecting a sealed or semi-sealed housing rather than a larger truck-style transfer case.
- All three configurations carry a "transferbox" note, identifying the fluid location as the transfer case housing specifically, as distinct from the front or rear differential assemblies.
- The capacity figure of 1.3 liters applies under normal use conditions for all listed configurations, meaning the value reflects standard operating fill rather than a post-overhaul or first-change-only scenario.
- The 2.5 T-GDI and 2.5 T-GDI AWD share an identical 1.3-liter transfer case capacity despite differing in drivetrain designation, indicating the transfer unit itself is dimensionally consistent between those two variants.
- The 3.5 T-GDI AWD, despite housing a larger displacement turbocharged V6 engine, carries the same 1.3-liter transfer case capacity as the four-cylinder variants, suggesting the transfer unit is shared across engine families in the GV80 lineup.