Genesis GV80 (USA)

Brake fluid capacity & service interval

Genesis GV80 (USA) brake fluid capacity is 0,7-0,8 liter. Service intervals include checking every 8000 miles or 12 months and changing every 48000 miles or 48 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
GV80 2.5 T-GDI (2020- )
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 8000 miles/ 12 months
  • Change 48000 miles/ 48 months
GV80 2.5 T-GDI AWD (2020- )
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 8000 miles/ 12 months
  • Change 48000 miles/ 48 months
GV80 3.5 T-GDI (2020- )
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 8000 miles/ 12 months
  • Change 48000 miles/ 48 months
GV80 3.5 T-GDI AWD (2020- )
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 8000 miles/ 12 months
  • Change 48000 miles/ 48 months

Additional Notes

  • The Genesis GV80 (USA) hydraulic brake system holds between 0.7 and 0.8 liter of brake fluid across all listed configurations. A range rather than a fixed value reflects normal variation in reservoir fill level during a service fill procedure.
  • The 0.7–0.8 liter capacity applies equally to the 2.5 T-GDI, 2.5 T-GDI AWD, 3.5 T-GDI, and 3.5 T-GDI AWD variants starting from 2020, indicating no capacity difference between the two engine displacements or between rear-wheel-drive and all-wheel-drive layouts.
  • A brake fluid check interval of every 8,000 miles or 12 months is specified for all four configurations under normal use conditions. The dual-trigger format means whichever threshold arrives first would apply.
  • The change interval is set at 48,000 miles or 48 months under normal use conditions. At four years or roughly 48,000 miles, brake fluid replacement is due regardless of whether the fluid appears visually degraded, since brake fluid absorbs moisture over time and loses its boiling point resistance.
  • The ratio between the check interval and the change interval is 1:6 by mileage and 1:4 by time, meaning a fluid check is due six times per mileage cycle and four times per calendar cycle before a full change is required.
  • All four rows carry the same normal use condition designation, meaning no separate severe-use interval is listed for the brake fluid system on any GV80 variant in the specifications.

Other Systems