Ford Tourneo Custom, V710 (EU)

Manual transmission fluid capacity & service interval

Ford Tourneo Custom, V710 (EU) manual transmission fluid capacity ranges from 2,35 to 2,6 liters. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Tourneo Custom 2.0 EcoBlue TDCi (100 kW) (2023- )
  • Use: Normal
  • Capacity 2,6 liter (Dry fill)
  • Capacity 2,35 liter (Service fill)
  • Code: VMT6 6/1
Tourneo Custom 2.0 EcoBlue TDCi (110 kW) (2023- )
  • Use: Normal
  • Capacity 2,6 liter (Dry fill)
  • Capacity 2,35 liter (Service fill)
  • Code: VMT6 6/1

Additional Notes

  • The Ford Tourneo Custom V710 (EU) 2.0 EcoBlue TDCi manual transaxle carries a dry fill capacity of 2.6 liters, which represents the total fluid volume required when filling a completely drained or newly assembled unit.
  • A service fill capacity of 2.35 liters applies to routine fluid changes on the manual transaxle, reflecting the smaller volume needed when residual fluid remains in the unit after a standard drain procedure.
  • The difference of 0.25 liters between the dry fill and service fill figures means using the dry fill value during a routine service would result in overfilling the transaxle.
  • Both the 100 kW and 110 kW variants of the 2.0 EcoBlue TDCi share identical manual transaxle fluid capacities, with 2.6 liters for dry fill and 2.35 liters for service fill, indicating the same transaxle unit is used across both power outputs.
  • The specifications for both engine variants are listed under normal use conditions, meaning the stated capacities apply to standard operating environments rather than severe-duty cycles.

Other Systems