Ford Kuga Mk III (EU)
Transfer case fluid capacity & service interval
Ford Kuga Mk III (EU) uses transfer case fluid with a capacity ranging from 0.38 liter to 0.5 liter depending on configuration. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Kuga 2.5 Duratec FHEV AWD (2024- ) |
|
| Kuga 2.0 EcoBlue (88 kW) AWD (2022- ) |
|
| Kuga 2.0 EcoBlue (140 kW) AWD (08/15/2021->) (2021-2022) |
|
| Kuga 2.5 Duratec FHEV AWD (2021-2024) |
|
| Kuga 2.0 EcoBlue (140 kW) AWD (<-08/15/2021) (2019-2021) |
|
Additional Notes
- The Ford Kuga Mk III (EU) transfer case fluid specifications cover two distinct capacity values across the available powertrain configurations: 0.38 liter and 0.5 liter, both recorded under normal use conditions.
- All three 2.0 EcoBlue AWD variants share a transfer case fluid capacity of 0.38 liter, regardless of output rating or production date range.
- The 2.0 EcoBlue 140 kW AWD configuration is split across two production date brackets, with the dividing point at August 15, 2021, yet both brackets carry the same 0.38-liter transfer case capacity under normal use.
- The 2.0 EcoBlue 88 kW AWD, introduced from 2022, also holds 0.38 liter of transfer case fluid under normal use conditions, placing it in alignment with the higher-output 140 kW diesel variant.
- The 2.5 Duratec FHEV AWD requires a noticeably larger transfer case fluid fill of 0.5 liter under normal use, which is approximately 32 percent more than the 0.38-liter figure associated with the EcoBlue diesel AWD variants.
- The 0.5-liter transfer case capacity for the 2.5 Duratec FHEV AWD appears across two separate year-range entries, covering 2021-2024 and a range starting from 2024, with no variation in the specified capacity between the two entries.