Ford Kuga Mk II (EU)

Transfer case fluid capacity & service interval

Ford Kuga Mk II (EU) uses transfer case fluid with a capacity of 0.45 liter. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Kuga 1.6 EcoBoost AWD (2013-2014)
  • Use: Normal
  • Capacity 0,45 liter
  • Code: (4x4)
Kuga 2.0 TDCi (140) AWD (2013-2014)
  • Use: Normal
  • Capacity 0,45 liter
  • Code: (4x4)
Kuga 2.0 TDCi (163) AWD (2013-2014)
  • Use: Normal
  • Capacity 0,45 liter
  • Code: (4x4)

Additional Notes

  • The Ford Kuga Mk II (EU) transfer case fluid capacity is listed at 0.45 liter across all three AWD configurations covered in the 2013-2014 specifications.
  • A transfer case fill volume of 0.45 liter is a relatively small quantity, consistent with the compact, electronically controlled transfer units commonly found in crossover AWD systems rather than traditional mechanical transfer cases with larger fluid reservoirs.
  • The 1.6 EcoBoost AWD variant carries the same 0.45 liter transfer case capacity as both diesel AWD variants, indicating no capacity difference between the petrol and diesel drivetrains for this component.
  • The two TDCi diesel variants, rated at 140 and 163 horsepower respectively, share an identical 0.45 liter transfer case specification, meaning output level within the same engine family does not affect the fluid capacity for the 2013-2014 model years.
  • All three rows are designated under normal use conditions, meaning the 0.45 liter capacity figure applies specifically to standard operating environments rather than severe-duty service.
  • Each row is noted as a transferbox specification, distinguishing the transfer case fluid service from other drivetrain fluid services such as the front or rear differential, which are separate systems with their own capacities.

Other Systems