Ferrari Purosanque
Brake fluid capacity & service interval
Ferrari Purosanque requires 1,1 liter of brake fluid. Service intervals include 20000 km or 24 months. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Purosanque (2023- ) |
|
Additional Notes
- The Ferrari Purosangue's hydraulic brake system holds 1.1 liters of brake fluid, a capacity consistent with a full-system service fill that accounts for the master cylinder reservoir, brake lines, and all four caliper circuits.
- The 1.1-liter capacity figure applies to the hydraulic brake system as a whole, meaning a complete fluid exchange would require close to that volume to fully displace the old fluid throughout the circuit.
- Under normal use conditions, the brake fluid reservoir level is specified for inspection at 20,000 km intervals, a mileage-based check intended to monitor fluid level and condition between scheduled changes.
- The change interval for brake fluid is set at 24 months regardless of mileage, reflecting the time-dependent nature of brake fluid degradation, particularly moisture absorption, which lowers the fluid's boiling point over time.
- The combination of a 20,000 km inspection interval alongside a fixed 24-month replacement interval means the fluid may be checked for level and contamination well before the mandatory change date is reached.