Ferrari Purosanque
Automatic transmission fluid capacity & service interval
Ferrari Purosangue automatic transmission fluid capacity is 13 liters. Service intervals include checks at 20000 km or 12 months and changes at 100000 km. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Purosanque (2023- ) |
|
Additional Notes
- The Ferrari Purosanque carries a transmission fluid capacity of 13 liters, which is a notably large fill volume consistent with a complex multi-clutch or torque-converter unit rather than a simple gearbox assembly.
- The 13-liter figure represents a service fill capacity, meaning the quantity of fluid required during a standard maintenance procedure rather than a full overhaul or dry-fill scenario.
- A check interval of 20,000 km or 12 months, whichever comes first, applies under normal use conditions, meaning routine driving without sustained high-load or extreme temperature exposure.
- The fluid change interval is set at 100,000 km under normal use conditions, placing the Purosanque's transmission service schedule on a long-life maintenance cycle relative to many performance vehicles.
- The specification classifies the transmission as semi-automatic, which in this context refers to a dual-clutch or automated manual unit that manages gear changes without a conventional torque converter, a design choice that influences both fluid type requirements and thermal load on the fluid.
- The gap between the check interval of 20,000 km and the change interval of 100,000 km means the fluid level and condition are inspected five times before a full drain and refill is due under normal use.