Ferrari Dino
Manual transmission fluid capacity & service interval
Ferrari Dino manual transmission fluid capacity is 4 liters. Service intervals consist of a 5000 km check and a 10000 km change. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Dino 246GT (1969-1974) |
|
| Dino 246GT (1969-1974) |
|
| Dino 206GT (1967-1969) |
|
Additional Notes
- The Ferrari Dino 206GT and 246GT both share a 4-liter manual transaxle fluid capacity, which is a notably large fill volume reflecting the integrated gearbox-and-differential transaxle design common to mid-engine layouts of that era.
- A 4-liter service fill capacity in a manual transaxle typically indicates a combined transmission and final drive housing, where a single fluid volume lubricates both the gear sets and the differential simultaneously.
- The 206GT, covering model years 1967-1969, carries a fluid check interval of 5,000 km under normal use conditions, paired with a change interval of 10,000 km.
- The 246GT, covering model years 1969-1974, shares the identical check and change intervals of 5,000 km and 10,000 km respectively under normal use conditions, despite being a mechanically distinct evolution of the 206GT.
- The 246GT specifications include an alternative acceptable fluid designation alongside the standard normal use entry, both at the same 4-liter capacity and the same 5,000 km check and 10,000 km change intervals, indicating the intervals remain unchanged regardless of which fluid type is used.
- The presence of an alternative acceptable fluid entry for the 246GT, without a corresponding entry for the 206GT, reflects a difference in how fluid options are specified between the two variants.