Ferrari Dino
Coolant capacity & service interval
Ferrari Dino coolant capacity is 17 liters. Service intervals require a check every 8 hours. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Dino 246GT (1969-1974) |
|
| Dino 206GT (1967-1969) |
|
Additional Notes
- The Ferrari Dino 206GT and 246GT share an identical coolant system capacity of 17 liters, which is a notably large fill volume for a mid-engine sports car of that era and reflects the demands of a high-revving engine mounted in a compact chassis.
- A 17-liter coolant capacity falls into the range typical of full service fills rather than partial top-ups, meaning the figure represents the total system volume when drained and refilled from empty.
- Both the 206GT and 246GT carry a check interval of every 8 hours of operation under normal use conditions, which is an unusually short interval by modern standards and points to the maintenance expectations of a performance vehicle from the late 1960s and early 1970s.
- The 8-hour check interval applies specifically to normal use conditions, meaning the coolant level is expected to be inspected at that frequency during standard driving rather than under any elevated or track-use scenario.
- Despite the 206GT using a 2.0-liter V6 and the 246GT using a 2.4-liter V6, the coolant system capacity remains unchanged at 17 liters across both variants, indicating no significant redesign of the cooling circuit between the two generations.