DS DS 3, U

Automatic transmission fluid capacity & service interval

DS 3, U automatic transmission fluid capacity ranges from 2,5 to 6 liters. Service intervals are not specified. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
DS 3 1.2 PureTech 130, HNS, HNL (2022- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1
DS 3 1.5 BlueHDi 130, YHZ (2022- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1

Additional Notes

  • The DS 3 1.2 PureTech 130 (HNS, HNL) carries a dry fill capacity of 6 liters for the automatic transaxle, a figure that reflects the total fluid volume required when filling a completely drained or newly assembled unit.
  • Service fill capacity for the 1.2 PureTech 130 automatic transaxle is listed as a range of 2.5 to 3.5 liters, which accounts for the residual fluid that remains in the torque converter and passages during a standard drain-and-fill procedure.
  • The 1.5 BlueHDi 130 (YHZ) shares the same dry fill capacity of 6 liters and the same service fill range of 2.5 to 3.5 liters, meaning the diesel variant's automatic transaxle holds an identical fluid volume to the petrol counterpart.
  • Both configurations specify normal use conditions, meaning the listed service fill range of 2.5 to 3.5 liters applies under standard operating circumstances rather than severe or extended-duty cycles.
  • The gap between the 6-liter dry fill and the 2.5 to 3.5-liter service fill range indicates that roughly 2.5 to 3.5 liters of fluid is retained within the transmission assembly during a routine service, making precise top-up measurement important to avoid overfilling.

Other Systems