Daihatsu Taft

Transfer case fluid capacity & service interval

Daihatsu Taft transfer case fluid capacity is 1,4 liters. Service intervals include checking every 10000 km or 6 months, and changing every 20000 km or 12 months, or every 40000 km or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Taft F60/F65 (1982-1984)
  • Use: Normal
  • Capacity 1,4 liter
  • Check 10000 km/ 6 months
  • Change 40000 km/ 24 months
Taft F25 (1979-1984)
  • Use: Normal
  • Capacity 1,4 liter
  • Check 10000 km/ 6 months
  • Change 40000 km/ 24 months
Taft F50 (1978-1982)
  • Use: Normal
  • Capacity 1,4 liter
  • Check 10000 km/ 6 months
  • Change 40000 km/ 24 months
Taft F55 (1978-1982)
  • Use: Normal
  • Capacity 1,4 liter
  • Check 10000 km/ 6 months
  • Change 40000 km/ 24 months
Taft F20 (1976-1984)
  • Use: Normal
  • Capacity 1,4 liter
  • Check 10000 km/ 6 months
  • Change 40000 km/ 24 months
Taft F10 (1974-1978)
  • Use: Normal
  • Capacity 1,4 liter
  • Check 10000 km/ 6 months
  • Change 20000 km/ 12 months

Additional Notes

  • All six Daihatsu Taft variants covered in these specifications share an identical transfer case fluid capacity of 1.4 liters, applying uniformly across the F10, F20, F25, F50, F55, and F60/F65 configurations.
  • The 1.4-liter figure represents a service fill capacity, meaning the amount of fluid required when refilling a drained but otherwise intact transfer case during routine maintenance rather than a full overhaul or rebuild.
  • Every variant specifies a fluid level check interval of 10,000 km or 6 months under normal use conditions, whichever comes first, indicating a time-based threshold alongside the distance-based one.
  • The Daihatsu Taft F10 (1974-1978) carries a fluid change interval of 20,000 km or 12 months under normal use conditions, which is half the change interval specified for all other variants in this set.
  • The F20, F25, F50, F55, and F60/F65 variants all share a fluid change interval of 40,000 km or 24 months under normal use conditions, double the distance and time threshold assigned to the F10.
  • The F60/F65 designation covers two sub-variants under a single specification row, both sharing the 1.4-liter capacity and the 40,000 km or 24-month change interval for the 1982-1984 production period.
  • The F50 and F55 variants, produced during 1978-1982, carry identical transfer case specifications to each other, with the same 1.4-liter capacity, 10,000 km check interval, and 40,000 km change interval under normal use conditions.

Other Systems