Daihatsu Taft
Coolant capacity & service interval
Daihatsu Taft coolant capacity ranges from 4 to 12,1 liters. Service intervals occur every 40000 km or 48 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Taft F60/F65 (1982-1984) |
|
| Taft F25 (1979-1984) |
|
| Taft F50 (1978-1982) |
|
| Taft F55 (1978-1982) |
|
| Taft F20 (1976-1984) |
|
| Taft F10 (1974-1978) |
|
Additional Notes
- The Daihatsu Taft F10 carries the smallest cooling system capacity across all listed variants at 4 liters, reflecting the relatively compact engine displacement of the F10 series produced between 1974-1978.
- The F20 and F25 variants share an identical 7-liter cooling system capacity, despite representing different model series. The F20 covers 1976-1984 while the F25 spans 1979-1984.
- The F50 and F55, both produced between 1978-1982, share a 10-liter cooling system capacity. A 10-liter figure is notably larger than the F20 and F25 at 7 liters, pointing to a more substantial engine requiring greater thermal management.
- The F60/F65 series, produced between 1982-1984, holds the largest cooling system capacity in the lineup at 12.1 liters. A capacity at this level is typical of larger displacement or diesel engines with higher heat rejection requirements.
- All six variants share a uniform coolant change interval of 40,000 km or 48 months under normal use conditions, whichever comes first. The 48-month ceiling means a vehicle driven infrequently would still require a coolant change after four years regardless of mileage.
- The capacity progression across the Taft range moves from 4 liters in the F10 to 12.1 liters in the F60/F65, a difference of more than 8 liters between the smallest and largest cooling systems listed.
- All specifications listed apply to normal use conditions only. No severe-use intervals are specified for any of the Taft variants in this data set.