Cupra Ateca, KH7/ KHP

Brake fluid capacity & service interval

Cupra Ateca, KH7/ KHP models require 1,15 liters of brake fluid. Service intervals include changes at 24 months and 36 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Ateca 1.5 TSI (110 kW) PF (2020- )
  • Use: Normal
  • Capacity 1,15 liter
  • Change 24 months
Ateca 1.5 TSI (110 kW) PF (2020- )
  • Use: First change only
  • Capacity 1,15 liter
  • Change 36 months

Additional Notes

  • The Cupra Ateca 1.5 TSI (110 kW) PF, introduced in 2020, carries a brake fluid capacity of 1.15 liters for the hydraulic brake system, which is consistent with a service fill volume rather than a full system overhaul.
  • Under normal use conditions, the hydraulic brake system on the 1.5 TSI (110 kW) PF calls for a fluid change interval of 24 months.
  • A first change only interval of 36 months is specified alongside the same 1.15-liter capacity, meaning the initial brake fluid change after delivery is extended by 12 months compared to the recurring normal-use schedule.
  • The distinction between the 24-month normal interval and the 36-month first change only interval reflects a common manufacturer practice where factory-filled fluid is considered fresh enough to allow a longer initial service window before the standard recurring cycle begins.

Other Systems