Citroën Berlingo, K9

Automatic transmission fluid capacity & service interval

Citroën Berlingo, K9 automatic transmission fluid capacity ranges from 2,5 to 6 liters. Service intervals are not specified. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Berlingo 1.2 PureTech 130, HNS (2018- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1
Berlingo 1.5 BlueHDi 130, YHZ (2018- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1

Additional Notes

  • The Citroën Berlingo K9 1.2 PureTech 130 (HNS) and 1.5 BlueHDi 130 (YHZ), both from 2018, share identical automatic transaxle fluid capacities across their respective specifications.
  • A dry fill capacity of 6 liters applies to both configurations, representing the total volume required when filling a completely empty transmission, such as after a full overhaul or unit replacement.
  • A service fill capacity of 2.5-3.5 liters applies to both configurations under normal use conditions, reflecting the partial volume exchanged during a routine fluid service where residual fluid remains in the torque converter and passages.
  • The service fill range of 2.5-3.5 liters, rather than a fixed value, accounts for variation in how much old fluid drains out during a standard service, which can differ depending on fluid temperature and drain time.
  • Both the petrol HNS and diesel YHZ engine variants are paired with the same transaxle automatic transmission type, resulting in no divergence in fluid capacity specifications between the two powertrains.

Other Systems