Chrysler (Grand) Voyager, S, ES (EU)
Coolant capacity & service interval
Chrysler (Grand) Voyager, S, ES (EU) models utilize coolant with a capacity range of 8 to 9,5 liters. Service intervals require a change every 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Voyager 2.5 TD (1992-1996) |
|
| (Grand) Voyager 3.3i (1990-1996) |
|
| (Grand) Voyager 3.3i AWD (1990-1996) |
|
| Voyager 2.5i (1986-1996) |
|
| Voyager 3.0i (1986-1996) |
|
Additional Notes
- Across all five configurations of the Chrysler (Grand) Voyager, S, ES (EU) covered here, the coolant change interval is uniformly set at 24 months under normal use conditions.
- The 3.3i and 3.3i AWD variants share an identical cooling system capacity of 8 liters, indicating no additional coolant volume is required to support the all-wheel-drive drivetrain on the AWD model.
- The Voyager 2.5i carries a cooling system capacity of 8.1 liters, placing it marginally above the 3.3i despite having a smaller displacement engine, which can reflect differences in block design, coolant jacket geometry, or heater circuit volume.
- The Voyager 2.5 TD and the Voyager 3.0i both share a cooling system capacity of 9.5 liters, the highest figure across all listed configurations, suggesting both engines require a notably larger coolant volume than the petrol 2.5i or 3.3i variants.
- The turbodiesel 2.5 TD, introduced from 1992, carries the same 9.5-liter capacity as the older 3.0i petrol engine despite being a smaller-displacement unit, a characteristic often associated with the additional thermal management demands of turbocharged diesel engines.
- The 2.5i has the longest production span among the listed variants, covering 1986-1996, while the 3.3i and 3.3i AWD entered the range later, from 1990 onward.