Chrysler (Grand) Voyager, RT (EU)

Automatic transmission fluid capacity & service interval

Chrysler (Grand) Voyager, RT (EU) automatic transmission fluid capacity ranges from 3,8 to 9,2 liters. Service intervals include 96000 km/72 months, 100000 km/60 months, 192000 km/144 months, and 200000 km/120 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
(Grand) Voyager 3.6 (2013-2015)
  • Use: Normal
  • Capacity 8,5 liter (Dry fill)
  • Capacity 5,2 liter (Service fill)
  • Change 192000 km/ 144 months
  • Code: 62TE 6/1
(Grand) Voyager 3.6 (2013-2015)
  • Use: Severe
  • Capacity 8,5 liter (Dry fill)
  • Capacity 5,2 liter (Service fill)
  • Change 96000 km/ 72 months
  • Code: 62TE 6/1
(Grand) Voyager 2.8 CRD (131 kW) (2012-2015)
  • Use: Normal
  • Capacity 8,5 liter (Dry fill)
  • Capacity 5,2 liter (Service fill)
  • Change 100000 km/ 60 months
  • Code: 62TE 6/1
(Grand) Voyager 2.8 CRD (120 kW) (2011-2015)
  • Use: Normal
  • Capacity 8,5 liter (Dry fill)
  • Capacity 5,2 liter (Service fill)
  • Change 100000 km/ 60 months
  • Code: 62TE 6/1
(Grand) Voyager 3.3 (2008-2010)
  • Use: Normal
  • Capacity 9,2 liter (Overhaul capacity)
  • Capacity 3,8 liter (Service fill)
  • Change 200000 km/ 120 months
  • Code: 4/1
(Grand) Voyager 3.3 (2008-2010)
  • Use: Severe
  • Capacity 9,2 liter (Overhaul capacity)
  • Capacity 3,8 liter (Service fill)
  • Change 100000 km/ 60 months
  • Code: 4/1

Additional Notes

  • The Chrysler (Grand) Voyager, RT (EU) 3.3 carries a 9.2-liter overhaul capacity, the largest full-system figure across all listed configurations, reflecting the total fluid volume required when the transmission is completely disassembled and rebuilt from a dry state.
  • The 3.3's service fill of 3.8 liters is notably lower than the 5.2-liter service fill shared by the 2.8 CRD and 3.6 variants, meaning a routine fluid exchange on the 3.3 replaces a smaller proportion of the total system volume.
  • Dry fill and overhaul capacity are not interchangeable terms across these rows. The 2.8 CRD and 3.6 entries use "dry fill" to denote a full initial fill of a new or empty unit, while the 3.3 entry uses "overhaul capacity" for the same purpose, indicating a complete rebuild scenario.
  • The 3.3 under normal use conditions carries a 200,000 km or 120-month change interval, the longest of any configuration listed. Under severe use conditions, the same engine's interval is halved to 100,000 km or 60 months.
  • The 3.6 under normal use conditions specifies a 192,000 km or 144-month interval. The 144-month figure represents a 12-year time limit, making the time component notably long relative to the other entries.
  • Under severe use conditions, the 3.6's interval drops to 96,000 km or 72 months, exactly half the distance and half the time of the normal use specification, a precise proportional reduction.
  • The 2.8 CRD variants, covering both the 120 kW and 131 kW output levels for 2011-2015 and 2012-2015 respectively, share identical capacity and interval figures: 8.5 liters dry fill, 5.2 liters service fill, and a 100,000 km or 60-month change interval under normal use.
  • The 2.8 CRD entries are classified as transaxle, automatic, indicating a transversely mounted unit integrating the transmission and differential, while the 3.6 is listed separately as transmission, automatic, reflecting a different assembly configuration.

Other Systems