Chrysler 300C, LX (EU)
Brake fluid capacity & service interval
Chrysler 300C, LX (EU) models utilize brake fluid with a capacity range between min and max. Service intervals require a check every 1 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 300C 3.0 V6 CRD (2012-2014) |
|
| 300C 3.6 V6 (2012-2014) |
|
| 300C 5.7 HEMI V8 (2012-2014) |
|
| 300C 3.0 V6 CRD (2011-2012) |
|
| 300C 3.6 V6 (2011-2012) |
|
| 300C 5.7 HEMI V8 (2011-2012) |
|
Additional Notes
- All six configurations of the Chrysler 300C LX (EU) specify brake fluid level as "between min and max," which is a reservoir level reference rather than a fixed fill volume. This approach is standard for hydraulic brake systems, where the fluid level in the reservoir reflects pad wear and system condition rather than a measurable service quantity.
- The 3.0 V6 CRD covering 2011-2012 and the separate 3.0 V6 CRD entry covering 2012-2014 both carry a monthly check interval under normal use conditions. The overlap at 2012 reflects a mid-year specification revision rather than a duplication error, with both entries sharing identical service guidance.
- The 3.6 V6 entry for 2011-2012 lists only the "between min and max" level specification under normal use, without a stated check interval. The corresponding 3.6 V6 entry for 2012-2014 adds a one-month check interval, marking a difference in service guidance between the two model year ranges for the same engine.
- The 5.7 HEMI V8 follows the same pattern as the 3.6 V6 across model years. The 2011-2012 entry carries no check interval, while the 2012-2014 entry specifies a one-month check under normal use conditions.
- A one-month brake fluid check interval is notably frequent by general automotive standards, where many manufacturers specify annual or biennial checks. For the configurations where this interval appears, normal use conditions are the stated context, meaning the interval is not reserved for severe or demanding operating environments.
- The hydraulic brake system note applies uniformly across all six rows, distinguishing the specification from other brake-related systems such as electronic parking brake actuators or brake booster circuits, which may have separate fluid or service considerations.