Chevrolet Biscayne (USA)

Manual transmission fluid capacity & service interval

Chevrolet Biscayne (USA) manual transmission fluid capacity ranges from 0,83 liter to 1 liter. Service intervals include a check every 2 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Biscayne, 250 (1961-1969)
  • Use: Normal
  • Capacity 0,83 liter
  • Check 2 months
  • Code: 3/1
Biscayne, 250 (1961-1969)
  • Use: Normal
  • Capacity 1 liter
  • Check 2 months
  • Code: 4/1
Biscayne, 283 (1961-1969)
  • Use: Normal
  • Capacity 0,83 liter
  • Check 2 months
  • Code: 3/1
Biscayne, 283 (1961-1969)
  • Use: Normal
  • Capacity 1 liter
  • Check 2 months
  • Code: 4/1
Biscayne, 327 (1961-1969)
  • Use: Normal
  • Capacity 0,83 liter
  • Check 2 months
  • Code: 3/1
Biscayne, 327 (1961-1969)
  • Use: Normal
  • Capacity 1 liter
  • Check 2 months
  • Code: 4/1
Biscayne, 396 (1961-1969)
  • Use: Normal
  • Capacity 0,83 liter
  • Check 2 months
  • Code: 3/1
Biscayne, 396 (1961-1969)
  • Use: Normal
  • Capacity 1 liter
  • Check 2 months
  • Code: 4/1
Biscayne, 427 (1961-1969)
  • Use: Normal
  • Capacity 0,83 liter
  • Check 2 months
  • Code: 3/1
Biscayne, 427 (1961-1969)
  • Use: Normal
  • Capacity 1 liter
  • Check 2 months
  • Code: 4/1

Additional Notes

  • Across all five engine variants of the Chevrolet Biscayne (USA) covered in the 1961-1969 specifications, two distinct manual transmission fluid capacities appear: 0.83 liter and 1 liter. The presence of two separate capacity figures for each engine suggests two different manual transmission units were in use across the model range during that period.
  • The 0.83-liter capacity represents the smaller of the two fill volumes listed. In manual transmission service, a lower capacity figure typically corresponds to a physically smaller or lighter-duty gearbox design.
  • The 1-liter capacity is the larger of the two values listed and would correspond to a transmission with a greater internal fluid volume, generally associated with a heavier or more robust unit.
  • The check interval of every 2 months applies uniformly across all engine variants and both capacity figures under normal use conditions. A 2-month check interval reflects a relatively frequent monitoring schedule, indicating the fluid level in these transmissions warranted regular attention.
  • The 250, 283, 327, 396, and 427 engine variants all share identical check intervals and the same pair of capacity values. No engine-specific deviation in either the check schedule or the fluid volumes is present in the specifications.
  • All rows in the specifications are designated under normal use conditions. The 2-month check interval and the associated capacity figures of 0.83 liter and 1 liter are therefore tied specifically to normal operating conditions rather than severe or first-change scenarios.

Other Systems