Chevrolet Beretta (USA / CAN)

Manual transmission fluid capacity & service interval

Chevrolet Beretta (USA / CAN) manual transmission fluid capacity is 2 liters. Service intervals consist of checks every 12000 km or 12 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Beretta 2.2 (1992-1994)
  • Use: Normal
  • Capacity 2 liter
  • Check 12000 km/ 12 months
  • Code: 5/1
Beretta 2.3 GTZ (1989-1995)
  • Use: Normal
  • Capacity 2 liter
  • Check 12000 km/ 12 months
  • Code: 5/1
Beretta 3.1 V6 (1989-1994)
  • Use: Normal
  • Capacity 2 liter
  • Check 12000 km/ 12 months
  • Code: 5/1

Additional Notes

  • All three configurations listed for the Chevrolet Beretta (USA / CAN) share an identical manual transaxle fluid capacity of 2 liters, indicating a consistent transmission unit across the 2.2, 2.3 GTZ, and 3.1 V6 engine variants.
  • The 2-liter figure represents a service fill capacity, which is the amount of fluid required when servicing the transaxle without a full teardown, rather than a complete overhaul fill.
  • The Beretta 2.2 carries a model year span of 1992-1994, making it the shortest-running configuration among the three, while the 2.3 GTZ spans 1989-1995 and the 3.1 V6 spans 1989-1994.
  • Each configuration specifies a check interval of 12,000 km or 12 months under normal use conditions, meaning the interval applies to standard driving rather than demanding or high-stress operating environments.
  • The 12-month time component in the check interval means that even with low annual mileage, a fluid inspection is due once a calendar year has elapsed, regardless of distance traveled.
  • The 3.1 V6 is the only configuration pairing a six-cylinder engine with the same 2-liter manual transaxle capacity shared by the four-cylinder variants, reflecting a common transmission platform across different engine displacements in the Beretta lineup.

Other Systems