Chevrolet Beretta (USA / CAN)
Automatic transmission fluid capacity & service interval
Chevrolet Beretta (USA / CAN) requires automatic transmission fluid with a capacity of 6,6 liters. Service intervals include checking every 12000 km or 12 months and changing every 25000 km. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Beretta 2.2 (1992-1994) |
|
| Beretta 2.3 GTZ (1989-1995) |
|
| Beretta 3.1 V6 (1989-1994) |
|
Additional Notes
- Across all three engine configurations covered — the 2.2, 2.3 GTZ, and 3.1 V6 — the Chevrolet Beretta automatic transaxle fluid capacity is 6.6 liters, indicating a consistent transmission unit shared regardless of engine displacement.
- The 6.6-liter figure represents a service fill capacity, which is the amount of fluid used during a routine drain-and-refill service rather than a full overhaul or dry-fill procedure.
- A fluid level check interval of every 12,000 km or 12 months, whichever comes first, applies uniformly to all three engine variants under normal use conditions.
- The fluid change interval is set at 25,000 km for all listed configurations, also under normal use conditions, meaning the vehicle is not subjected to frequent towing, extreme temperatures, or other demanding operating circumstances.
- The 2.2-liter variant carries a model year span of 1992-1994, making it the shortest production window among the three configurations listed, while sharing identical fluid service specifications with the other two.
- The 2.3 GTZ spans 1989-1995, the widest year range among the listed variants, yet no deviation in fluid capacity or service intervals is noted across that period.
- The 3.1 V6, covering 1989-1994, pairs a larger displacement engine with the same 6.6-liter transaxle capacity as the four-cylinder variants, reflecting a shared automatic transaxle platform rather than a displacement-specific unit.